FLUID-BED Multi-Processor
FLUID-BED Multi-Processor
APPLICATION:
FBM Series Fluid-bed Multi-processor is added bottom spray on the base of FBG series Fluid-bed Granulator, thus can realize drying, granulating and bottom spray coating on one machine, and with function of mixing raw material, granulation, dying and coating for granules or pellets. The equipment is PLC auto controlled and well satisfies with the current GMP and the National Pharmacopoeia.
WORKING PRINCIPLE:
The intake air is processed from the inlet AHU through filters and heated, then lead into the lower bowl. The material is blow up evenly by hot air which passes through air distribution plate of product bowl, then forms continuous fluidized state and dried evenly by hot air.
In case of top spray for fluidized granulation, use top spray movable product bowl, the binder is top sprayed through spray guns in diffuse chamber into the product bowl, and spray onto the material surface atomized by compressed air. The product granules cohere each other by the binder and get the binder bridge to form the core granules, then grow up to form required wet granules, which the binder dried evenly by hot air and finally get dry granules.
In case of bottom spray for coating, use bottom spray movable product bowl, the binder changes to spray from bottom spray guns and atomized. The granules or pellet sprayed from bottom to top inside of fluidized chamber and coated by coating solutions, then fall back along the wall of bottom spray product bowl and dried by hot air, which back to bottom are sprayed again from fluidized chamber and repeat coating process.
FEATURES:
1. INLET AHU
The inlet AHU including three stage filters with G4, F8 and H13, dehumidifier with surface cooler, inlet air temperature controlled by cold and hot air mixing door, inlet air volume by inverter controlled which can set and adjust.
2. MAIN BODY STRUCTURE
The main body structure consists of lower bowl, top spray movable product bowl , bottom spray movable product bowl , diffuse chamber and filter chamber. The lower bowl, movable product bowl and diffuse chamber are silicon inflatable sealed with compress air inspection to assure the reliable sealing.
3. PRODUCT FILTER
The pulse anti-blow filter clean device adopt anti-static cloth filter (in case request, stainless steel anti-blow filter is available), which is silicon inflatable sealed with the filter chamber with compress air inspection to assure the reliable sealing. A dust sensor is mounted on the exhaust piping and interlocked with PLC control sys to secure the product safety during production.
4.EXHAUST AHU
The exhaust dust collection sys can be optionally designed upon request to protect environment.
5. 2 BAR & 10 BAR DUST EXPLOSION DESIGN
The 2 bar and 10 bar powder ex-proof design is selectable to ensure the operator, equipment and environment safety with reliable grounding device.
6.FLUIDZED GRANULATION
In case of fluidized granulation is requested, the binder solution tank and spray sys with peristaltic pump would be supplied. The binder sprays into product bowl through spray guns and spray onto the material surface atomized by compressed air. The product granules cohere each other by the binder and get the binder bridge to form the core granules, then grow up to form required wet granules, which the binder dried evenly by hot air and finally get dry granules.
7. BOTTOM SPRAY FOR COATING
In case of bottom spray for coating, use bottom spray movable product bowl, the binder changes to spray from bottom spray guns and atomized. The granules or pellet sprayed from bottom to top inside of fluidized chamber and coated by coating solutions, then fall back along the wall of bottom spray product bowl and dried by hot air, which back to bottom are sprayed again from fluidized chamber and repeat coating process. The height of fluidized chamber can be adjusted according to the quantity of material, and get the best fluid state. The bottom spray air distributing plate can be changed to different spray distance and flow based on material characteristics.
MAIN TECHNICAL PARAMETERS:
|
Model
|
Material Bowl Volume
|
Batch Size
|
Heating Temperature
|
Fan Motor Power
|
Air Volume/ Full Pressure
|
Steam Consumption
|
Compress Air Cons.
|
Main Machine Overall Dimension
|
Total Weight
|
|
L
|
Kg / ρ=0.5
|
C°
|
kW
|
M3/Pa
|
M3/h
|
M3/min
|
LXHXD /m
|
Kg
|
|
|
FBM25
|
Top spray 25
|
3~9.5
|
Room Temp.~90
|
4.0
|
1000/4500
|
Electric Heating 12kW
|
0.1
|
2.3X2.3X1.0
|
1000
|
|
Bottom spray 20
|
3~9
|
|
|
|
|
|
|
|
|
|
FBM50
|
Top spray 50
|
6~18
|
Room Temp.~90
|
5.5
|
1200/9000
|
Electric Heating 18kW
|
0.15
|
2.6X2.90X1.2
|
1850
|
|
Bottom spray 30
|
6~12
|
|
|
|
|
|
|
|
|
|
FBM100
|
Top spray 100
|
12.5~38
|
Room Temp.~110
|
11
|
2000/11000
|
120
|
0.15
|
3.5X3.8X1.4
|
2500
|
|
Bottom spray 73
|
10~25
|
|
|
|
|
|
|
|
|
|
FBM150
|
Top spray 200
|
20~60
|
Room Temp.~110
|
15
|
3800/9200
|
150
|
0.15
|
3.5X3.8X1.4
|
2500
|
|
Bottom spray 110
|
15~35
|
|
|
|
|
|
|
|
|
|
FBM200
|
Top spray 200
|
25~75
|
Room Temp.~110
|
15
|
3800/9200
|
150
|
0.15
|
3.7X4.2 X1.7
|
2700
|
|
Bottom spray 140
|
18~40
|
|
|
|
|
|
|
|
|
|
FBM300
|
Top spray 300
|
38~110
|
Room Temp.~110
|
22
|
3800/9200
|
210
|
0.2
|
3.8X4.7X1.8
|
3000
|
|
Bottom spray 170
|
35~105
|
|
|
|
|
|
|
|
|
|
FBM400
|
Top spray 400
|
50~150
|
Room Temp.~110
|
30
|
6000/11000
|
270
|
0.2
|
2.3X4.9X2.2
|
3300
|
|
Bottom spray 380
|
45~140
|
|
|
|
|
|
|
|
If you are interested in this machine, please contact me: Nana Zhang
Shanghai Medigrade Industry Co.,Ltd
Waigaoqiao Free Trade Zone, Shanghai,China. 200137
Cell Phone: 0086-15800947006
Tel: 0086-21-58589972
Fax: 0086-21-68689726
https://medigrade.en.made-in-china.com/ made-in-china.com
