Blister Machine BMP270
Brief introduction
This machine is equipped with an integrated forming material splicer to enhance efficiency during material replacement.
Description
Customer Case
Featured Products
The main structure has a vertical partition to separate the drive section (rear) from the operating zones (front).
. GMP-compliant cantilever (balcony type) layout for easy, pharmaceutically compliant cleaning.
. Adopts digital position indicator achieves straightforward adjustment.
. Equipped with format locking, positioning system, and quick-fitting, tool-free design, achieves extremely straightforward format changeover (new).
. In the sealing station, when the machine stops, the heating sealing mold can rise up automatically to prevent hot air from getting into the blister pockets so that medicine effectiveness is preserved.
. Sealing pressure adopts the gas-hydraulic pressure cylinder, so the pressure can be set freely according to the sealing area (commonly, a larger sealing area requires higher pressure) (new).
. This machine is equipped with an integrated forming material splicer to enhance efficiency during material replacement.
. The upper and lower plates adopt a contact heating method that significantly reduces the forming temperature. Thus the shrinkage, deforming of packaging material, and power consumption is minimized.
. Using a quick-fitting design enables the replacement of lidding material easily within 10 seconds.
. The blister length can be set free through Touch Screen User Interface, which reduces the time for a format changeover.
. A larger area of the working station, the width of forming, sealing, and embossing stations reach 180mm, suitable for mass production.
Gallery
The machine accommodates forming material reels of up to 600mm in diameter.
The machine is equipped with an integrated forming material splicer to enhance efficiency during material replacement.
Adopt contact heating method that significantly reduces the forming temperature. Thus the shrinkage, deforming of packaging material and power consumption are minimized.
Equipped with format locking, positioning system and quick-fitting, tool-free design, achieves extremely straightforward format changeover.
Larger area of forming and sealing station, suitable for mass batch production.
The universal feeder consists of two circular brushes and planetary agitators, which sweep the products into blister pockets. Format parts are not required.
The universal feeder is capable of feeding almost all items such as capsules, flat tablets, oval tablets, capsule tablets, triangular tablets or other various shapes.
Integrated product inspection system with color camera can reject faulty blisters automatically (optional).
The lidding material loader adopts quick-fitting mechanism, all of the guide rollers are labeled with a sequence number and placement direction, enabling easily to replace, guide the lid foil through the machine
Adopts digital position indicator achieves straightforward adjustment of all work stations during format changeover.
The main structure has a vertical partition to separate the drive section (rear) from the operating zones (front). GMP-compliant cantilever (balcony type) layout for easy, pharmaceutical compliant cleaning.
After cutting, the blister cards are discharged by transport belt automatically.
Pinhole detection system for quality assurance of blister packaging (optional).
Main Technical Parameters：
If you are interested in this, please contact me: Nana Zhang
Cell Phone: 0086-15800947006
https://medigrade.en.made-in-china.com/ made-in-china.com
. GMP-compliant cantilever (balcony type) layout for easy, pharmaceutically compliant cleaning.
. Adopts digital position indicator achieves straightforward adjustment.
. Equipped with format locking, positioning system, and quick-fitting, tool-free design, achieves extremely straightforward format changeover (new).
. In the sealing station, when the machine stops, the heating sealing mold can rise up automatically to prevent hot air from getting into the blister pockets so that medicine effectiveness is preserved.
. Sealing pressure adopts the gas-hydraulic pressure cylinder, so the pressure can be set freely according to the sealing area (commonly, a larger sealing area requires higher pressure) (new).
. This machine is equipped with an integrated forming material splicer to enhance efficiency during material replacement.
. The upper and lower plates adopt a contact heating method that significantly reduces the forming temperature. Thus the shrinkage, deforming of packaging material, and power consumption is minimized.
. Using a quick-fitting design enables the replacement of lidding material easily within 10 seconds.
. The blister length can be set free through Touch Screen User Interface, which reduces the time for a format changeover.
. A larger area of the working station, the width of forming, sealing, and embossing stations reach 180mm, suitable for mass production.
Gallery
The machine accommodates forming material reels of up to 600mm in diameter.
The machine is equipped with an integrated forming material splicer to enhance efficiency during material replacement.
Adopt contact heating method that significantly reduces the forming temperature. Thus the shrinkage, deforming of packaging material and power consumption are minimized.
Equipped with format locking, positioning system and quick-fitting, tool-free design, achieves extremely straightforward format changeover.
Larger area of forming and sealing station, suitable for mass batch production.
The universal feeder consists of two circular brushes and planetary agitators, which sweep the products into blister pockets. Format parts are not required.
The universal feeder is capable of feeding almost all items such as capsules, flat tablets, oval tablets, capsule tablets, triangular tablets or other various shapes.
Integrated product inspection system with color camera can reject faulty blisters automatically (optional).
The lidding material loader adopts quick-fitting mechanism, all of the guide rollers are labeled with a sequence number and placement direction, enabling easily to replace, guide the lid foil through the machine
Adopts digital position indicator achieves straightforward adjustment of all work stations during format changeover.
The main structure has a vertical partition to separate the drive section (rear) from the operating zones (front). GMP-compliant cantilever (balcony type) layout for easy, pharmaceutical compliant cleaning.
After cutting, the blister cards are discharged by transport belt automatically.
Pinhole detection system for quality assurance of blister packaging (optional).
Main Technical Parameters：
| Max. Speed: | alu/alu 40punches/min. alu/pvc 60punches/min. |
| Max. Output: | 200 blisters/min. (alu/pvc blister size 57× 80mm) |
| Max. Forming Area: | 265×170mm |
| Max Forming Depth: | 22mm |
| Material: | Max. width 275mm |
| Machine Power: | 15.6kw |
| Machine Dimension: | 5300×1200×2000mm (5 stations style) |
| Machine Weight: | 3600kg |
If you are interested in this, please contact me: Nana Zhang
Cell Phone: 0086-15800947006
https://medigrade.en.made-in-china.com/ made-in-china.com
Customer Case
Featured Products
All the main parts are made of premium stainless steel and alu-alloy material and machined by advanced high-precision CNC tooling machines.
Pharmaceutical Research and Development laboratories, Clinical trials, Stability studies, Package development, Marketing, samples, Pharmaceutical production, and packaging departments.
Thanks to rotary sealing style (alu-pvc) and larger tropical aluminum forming and sealing area, the machine archives high output, for the size of 98mm*70mm, the output can up to 180 blister cards/minute (DPH260H3) and 270 blister cards/minutes (DPH350H3).
